Extending the brake pedal out to the right!

[tommy666]

Howdy,

Question, I've done some adjustments and need one more! I put the S&S dual induction system on my bike along with the Rivco Products Hi-Way pegs along with their 3" extensions. My foot controls also have the 2.5" forward extensions. I need my brake pedal to come out at least another 2-3 inches so I can see it. Any idea's? Talk to me!


Thanks!

Tommy

 

[Black Rider]

Got any pics of the Rivco bars? As for moving the brake out. Extended cleavis may do it. I bought some off eBay. Have not mounted yet

 

[woodbutcher]

now, doesn't the bagger have floor boards on it? seems to me like the only logical thing to do would be to find a machine shop that could do an extension block out of billet and then come up with a way of extending the boards out to match. take caution you don't get it out so far that it interferes with how far you can lean the bike.

 

[tommy666]

No floorboards! They went bye bye!

 

[Little-Boo]

Go here

Bolt Depot - Nuts and Bolts, Screws and Fasteners online


Get you a set of Spacers grade 2 Chrome, or aluminum 1 inch long or two inches long. I think I got the 5/16 ID with 9/16 OD or the 5/8th OD I forgot, but I can check when I get home. I had the same problem and that took care of it. Cheap.

If you have the stock foot pegs you will need the Clevis extension and I have a new set that I got from BDM that I will take $75.00 for they cost $119 new and mine are new. You will still need to extend the toe peg and brake peg and that is where Bolt Depot come in. I can take a pic for you but that will be Friday when I get home. I will also be able to tell you exactly what to get from bolt depot screws and all.


Carlos

 

[tommy666]

Hey Carlos,
Yes! Thank You!

 

[RubWhore]

Get you a set of the extended peg adapters they move the pegs out 2and half inches on both sides

 

[Little-Boo]

Hey Carlos,
Yes! Thank You!

Cool, I am headed home tomorrow, I'll post a few pics tomorrow evening.

Carlos :2thumbs:

 

[Little-Boo]

Howdy,

Question, I've done some adjustments and need one more! I put the S&S dual induction system on my bike along with the Rivco Products Hi-Way pegs along with their 3" extensions. My foot controls also have the 2.5" forward extensions. I need my brake pedal to come out at least another 2-3 inches so I can see it. Any idea's? Talk to me!


Thanks!

Tommy

Here is what I have, pictures are not all that great, but you get the idea

Here is what you will need from Bolt Depot

Item 13713 ( 2 inch long spacer 1 inch OD) cat $9.24

Item 13684 ( 1 one inch long spacers 1/2 inch OD) those go inside the big one becasue the hold is big. Cost is $2.24 each

Item # 5556 (1 Stainless Steel Bolt 1/4 X 20 X 3 1/2 inches long) Cost $1.17

The Last Picture are the clevis extensions I mentioned before. The will only fit stock foot pegs, cost is $119 at BDM I will let them go for $75. shipped if you are interested.

Anything else you need to know about this let me know

Carlos

 

[tommy666]

PM SENT