electrical

[Rev]

Just shrink wrapped my wiring on me 2004 mastiff replacement loam and now have the two indicator lights on low when power up the bike.
Have l some how shorted out a couple of wires, or is this a warning light scenario or none of the above any help may save me having to strip back all the wires again, so your advice is appreciated-
Rev

 

[cdogg556]

I hate to say it but it definitely sounds like sumth'n is shorted out somewhere, your just gonna have to go one connection at a time, maybe someone else has had a similar problem and will chime in soon.

 

[Hirter6Pack]

Mine have always done that too. The two outside indicators lights have always been on very faintly after replacing the EHC with the RIP1. I just never have worried about it.

 

[cdogg556]

View attachment 50175
Mine have always done that too. The two outside indicators lights have always been on very faintly after replacing the EHC with the RIP1. I just never have worried about it.

See, I knew someone would know what's up!

 

[Rev]

Thanks guys, yip same problem, l put in a new rip unit as well, and was worried might do some damage to something else in the system if didn't sort it.
l heard it has some loop back system problem, but will need more research.
Just happy to know someone else been there and hasn't caused a problem.
Will post if find out any more, but thanks for your feed back and the peace of mind- happy trails -Rev

 

[cdogg556]

Thanks guys, yip same problem, l put in a new rip unit as well, and was worried might do some damage to something else in the system if didn't sort it.
l heard it has some loop back system problem, but will need more research.
Just happy to know someone else been there and hasn't caused a problem.
Will post if find out any more, but thanks for your feed back and the peace of mind- happy trails -Rev

Cool, now get'r out and ride Rev!