EHC or Wire Plus?

[okred696]

I bought an 07 Limited Edition and Looking under the seat it looks like the wire plus kit on ebay. The Key is not Big Dog it looks like the one on ebay too. The one box has a relay plugged into itand the other one has red and green lites. I need a pic of what a stock EHC looks like. The speed o is Dakota Digital.. The bike is fine except you have to hit the run button 2 or 3 times before it will start. You guys have got me worried about the EHC. So i need to figure out what i got. Can some one show me a pic of the stock EHC. And help me figure out what I got.

 

[Thors]

2 boxes, one with a relay plus the ignition switched over definitely sounds like a wire plus kit. EHC is a single block with one large plug.

Check this link out: http://www.wire-plus.com/Big-Dog-EHC-Retrofit-kit_p_7.html

Look like your stuff?

 

[pknowles]

I bought an 07 Limited Edition and Looking under the seat it looks like the wire plus kit on ebay. The Key is not Big Dog it looks like the one on ebay too. The one box has a relay plugged into itand the other one has red and green lites. I need a pic of what a stock EHC looks like. The speed o is Dakota Digital.. The bike is fine except you have to hit the run button 2 or 3 times before it will start. You guys have got me worried about the EHC. So i need to figure out what i got. Can some one show me a pic of the stock EHC. And help me figure out what I got.

just sent you a picture of a ehc module from my manual.

 

[okred696]

Thanks for yals help. Will be checking it out when I get home.

 

[coachk]

http://www.bigdogbiker.com/forums/general/56620-got-stranded-k-9-a.html#post592753

.

 

[okred696]

Its a wire plus YA

Thanks to PK figured out it is a wire plus. I have the Dakota Digital Speed O. Any other issues I need to know about since we got that figured out? Thank all who chimed in.

 

[HMAN]

If u have to hit the run button multiple times u may want to pull ur hand control an clean the board...it may be a simple bad connection issue.

 

[C.A. Jones]

You do not need to hit the run button with the Wire Plus setup. It's hot as soon as you turn the key on. Hitting the run button is the opposite of what you want to do.C.A.Jones V-Twin | Custom Builds, Parts & Service

 

[bearman]

You do not need to hit the run button with the Wire Plus setup. It's hot as soon as you turn the key on……

X2
That’s why you have to hit it again if you hit it once. Just don’t hit it at all.