Relic Active Member Jun 12, 2011 #1 Any preferance on drive belts ? Gates, BDL Falcon, Dayco Panther, Harley (Gates) ?
Relic Active Member Dec 12, 2012 #3 Bumping this back up since no one replied. Specifically, has anyone tried a Dayco - Carlise Panther ?
Bumping this back up since no one replied. Specifically, has anyone tried a Dayco - Carlise Panther ?
Brew Troop Supporter Dec 12, 2012 #4 Read up on this thread might help in the decision http://www.bigdogbiker.com/forums/general/35726-supermax-pulley-tracking-inward-2.html
Read up on this thread might help in the decision http://www.bigdogbiker.com/forums/general/35726-supermax-pulley-tracking-inward-2.html
mcgroom Well-Known Member Dec 12, 2012 #5 If you decide on Gates, let me know and I will do my best to help you out. I may be able to get a Dayco, just haven't check on one in a while. Here to help.
If you decide on Gates, let me know and I will do my best to help you out. I may be able to get a Dayco, just haven't check on one in a while. Here to help.
Billy the kid Guru Supporting Member Dec 12, 2012 #8 I have a Gates belt on my Ridgeback, works good no problems.
Relic Active Member Dec 13, 2012 #10 Thanks for the replys. I've used Gates on the last 2 I've changed with no problems. The reason I asked about Dayco was Bob Lockwood mentioned a few years ago that the Dayco Panther belts were less prone to noise.
Thanks for the replys. I've used Gates on the last 2 I've changed with no problems. The reason I asked about Dayco was Bob Lockwood mentioned a few years ago that the Dayco Panther belts were less prone to noise.
HMAN I just like my Freedom Supporting Member Dec 13, 2012 #11 I went with a Primo. No problems to date. Runs n tracks smooth.