Rev
Member
Hi to all from New Zealand Auckland, l put some posts up a while ago on a RIP EHC replacement loam l was putting in my 2004 Mastiff.
All was fairly straight forward except when came to installing the dash, different color wires and from what remember, the 7 wires then became 8 or other way round.
This had everone scraching there heads and did mine in completly, later found out through this site the RIP Replacement loam might come with a sub loam for the 2004 Mastiff.
Of coarse It did and somehow had been forgotten when was shipped to me.
After speaking to Bigdog, thankfully they sent one out pretty quick and after soldering back the wires l had cut when trying to nut this out, have finally got it all to work, although have not yet started it, as 3.30am in the morning here and me neighbors probably wont be impressed, but sure will fire up as did before just had no dash lights.
Here's my concern, l have all lights hi/low indicators, brakes and dash,
but for what ever reason l have the two indicator lights remaining on dim when l power it up.
Is this a warning scenario
or have l cocked it up some how.
let me know if can be of help,
cheers Rev
All was fairly straight forward except when came to installing the dash, different color wires and from what remember, the 7 wires then became 8 or other way round.
This had everone scraching there heads and did mine in completly, later found out through this site the RIP Replacement loam might come with a sub loam for the 2004 Mastiff.
Of coarse It did and somehow had been forgotten when was shipped to me.
After speaking to Bigdog, thankfully they sent one out pretty quick and after soldering back the wires l had cut when trying to nut this out, have finally got it all to work, although have not yet started it, as 3.30am in the morning here and me neighbors probably wont be impressed, but sure will fire up as did before just had no dash lights.
Here's my concern, l have all lights hi/low indicators, brakes and dash,
but for what ever reason l have the two indicator lights remaining on dim when l power it up.
Is this a warning scenario
or have l cocked it up some how.
let me know if can be of help,
cheers Rev