Converted to a rear kickstand on 2003 Mastiff

[sk81135]

I converted from a normal kickstand on a 2003 Mastiff to a rear kickstand. This gave me a little more ground clearance and I think it looks 100% better.

Went from this:



To this:

 

[BWG56]

Nice good job

 

[awg]

Did you drill through the frame?

 

[sk81135]

Yea I drilled a 5/16 hole and tapped it to a 3/8 bolt then just red lock-tight the bolts in.

 

[KaptinAmerika]

Defnitely looks much better.

 

[awg]

Where did the stand come from? The tab looks like BD.

 

[Little-Boo]

Looks good now all you need to do is remove that ugly factory Decals on the down tubes. They come off easy, then stick them under the seat or on the inside of your service manual cover. If you are tall and need some 3 inch forward control extension let me know I can fix you up and perhaps make your bike look even better

Carlos

 

[cdogg556]

Looks good now all you need to do is remove that ugly factory Decals on the down tubes. They come off easy, then stick them under the seat or on the inside of your service manual cover. If you are tall and need some 3 inch forward control extension let me know I can fix you up and perhaps make your bike look even better

Carlos

Got any for a 09 mastiff Carlos?

 

[sk81135]

Where did the stand come from? The tab looks like BD.

I bought it from www.wildsteedworx.com

 

[Brew]

Looks great, great job...

 

[sk81135]

Looks good now all you need to do is remove that ugly factory Decals on the down tubes. They come off easy, then stick them under the seat or on the inside of your service manual cover. If you are tall and need some 3 inch forward control extension let me know I can fix you up and perhaps make your bike look even better

Carlos

Hey Carlos,
Do you have 3" forward controls for a 2003 Mastiff? If so I am interested in some.
Thanks,
Ben

 

[Little-Boo]

Got any for a 09 mastiff Carlos?

Sorry all I have is the ones for the 03 BDM

Carlos

 

[Little-Boo]

Hey Carlos,
Do you have 3" forward controls for a 2003 Mastiff? If so I am interested in some.
Thanks,
Ben

The ones I have were supposed to be installed on my nephews 03 Mastiff, however that thing got stolen before we got the parts in . The kit consists of two plates, a brake line extension and the shift rod. I don't know what happened to the shift rod, but I have one I can throw in. The Rod itself cost more than the kit. If it doesn't fit you can sent it back at your expense.

all that for what I think is a fair price $175.00 Shipped

Carlos

 

[Peckerwood]

Looks good. I did the same thing on my '04 Mastiff, no more dragging thru left turns. You will like it.

 

[cdogg556]

The ones I have were supposed to be installed on my nephews 03 Mastiff, however that thing got stolen before we got the parts in . The kit consists of two plates, a brake line extension and the shift rod. I don't know what happened to the shift rod, but I have one I can throw in. The Rod itself cost more than the kit. If it doesn't fit you can sent it back at your expense.

all that for what I think $175.00 Shipped

Carlos

I'll pm ya about it, thanks!

 

[Dragonslave]

Same kickstand I have. Its great

 

[Srodden]

Looks a lot better !