clutch not changing to netral!!!!!!

[kk9]

Big Dog Bikers,

I bought a K9 one month ago and when ride it that the clutch not changing to neutral when I stop and give throttle then it change ,but when moving it changing. I have changed the transmission oil and clutch cable ,but nothing new.

could any advise:bang::bang::bang::bang:

 

[Slick-Dog]

http://www.bigdogbiker.com/forums/help-wanted/41253-clutch-adjustment-help.html

Heres a start... tells you how to adjust the clutch push rod.. This will get you started in the right direction..

 

[Bobby Schulz]

I would check the hub nut and then adjust the clutch.

 

[francoblay1]

Another good thread on HOW TO adjust the clutch: http://www.bigdogbiker.com/forums/how/2025-how-adjust-your-clutch-05-newer.html

 

[francoblay1]

Also, CHECK THIS OUT: http://www.bigdogbiker.com/forums/introductions/25016-your-introduction.html :2thumbs:

 

[Sven]

1. Plate warpage = Creeps - Hard to find N.

2. Pressure plate = This is for concave style, i.e., wave plate - "Is not flat" will cause same creep and hard to find N.

3. Cable/adjust nut combo = This is more a one step, where the proper adjust pin and cable slack are adjusted properly - This too will affect how you find N and how it creeps into an intersection you still have it in gear.