Clutch fail

[will_65466@live.com]

Hi all, I have a 2007 k9 that while on the way to work the clutch quit. I thought maybe the cable broke but pulled it apart and cable was fine. So reading around I thought maybe clutches were the culprit so I pulled primary and it was all in order. So I think it's inside the transmission. Also I will add that even when put in gear it rolls like its in neutral. :bang: how much to have trans rebuild?

 

[Brew]

Hmmm you sure your trans main shaft didn't break?

 

[will_65466@live.com]

I'm not sure, how can I find out do I pull the inner primary?

 

[Brew]

No check out the thread I attached below, mainly look at the pics on the last page. I've had the newer main shafts installed on both my scoots because mine were the old type shafts that are failing. Andrew would be our Trans expert. Might want to PM him...

http://www.bigdogbiker.com/forums/t...ssion-rebuilding-service-all-types-385-a.html

 

[KaptinAmerika]

No check out the thread I attached below, mainly look at the pics on the last page. I've had the newer main shafts installed on both my scoots because mine were the old type shafts that are failing. Andrew would be our Trans expert. Might want to PM him...

http://www.bigdogbiker.com/forums/t...ssion-rebuilding-service-all-types-385-a.html

:2thumbs:X2 Sounds like a broken main shaft

 

[will_65466@live.com]

Thanks Brew. Looks like I gotta contact Andrew. I sure appreciate it

 

[francoblay1]

No, leave Andrew alone ... his busy in Eurpe noe!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

:bang:

 

[BWG56]

Andrew's going to have to catch you next time Franco, he had to cut his trip short to come back:lol: