Clutch cable help!!

[John Cingel]

So I put my primary back together after changing the hub nut & throw out bearing and while I was adjusting the clutch I broke the threaded barrel at the adjuster. I guess my question is what's my next step. What all do I have to replace and are the parts available for a 2008 mastiff.

 

[BWG56]

So I put my primary back together after changing the hub nut & throw out bearing and while I was adjusting the clutch I broke the threaded barrel at the adjuster. I guess my question is what's my next step. What all do I have to replace and are the parts available for a 2008 mastiff.

Send it out to Barnett Cables and they will replace it for $10 for the inner cable but the adjuster could be another couple bucks

https://www.google.com/url?sa=t&rct...s.html&usg=AFQjCNH1DN35i2Zd-kKQtv_jqteVn9oUPw

 

[Steve2134]

So I put my primary back together after changing the hub nut & throw out bearing and while I was adjusting the clutch I broke the threaded barrel at the adjuster. I guess my question is what's my next step. What all do I have to replace and are the parts available for a 2008 mastiff.

John,
I have a 2007 Mastiff and did the exact same thing. Stupid adjuster is just chromed over brass but looks like steel though. I really tried to tighten the lock-nut and broked it. I work in a machine shop and managed to braze and rethread the adjuster. To take the outer sleeve apart I though I had to cut the barrel off so my cable is just a smidge shorter. I brazed the barrel back on but I too just rebuilt my clutch (including replacing the carrier bearing) and I’d like to make sure this cable is mint. It’s a nice Barnett cable I want to keep. Did you end up going through Barnett to fix yours? Im going to call them tomorrow but I don’t know what the proper cable measurement is if they ask me. I’m sure our cables are the same length. -Steve