clutch basket and hub

[bad chad]

hey guys we are working on my buddys 04 mastiff the stator went out. hes being hearing a bad awful sound at idle like someting knocking in prim. cover. we found the problem the clucth sprocket on the clucth hub that the chain runs on was lose and moves and wobbles. my question how do you separate the basket from the hub to get acesss to the allen screws to tighten the sprocket gear. im thinking its a pressed unit is this true?????????????

 

[bad chad]

i take it this is a tuffy, anybody has an idea i know gas man can answer this one. also guys were can i find a stator for this bike big dog said its on backorder any other website were i can find one.......

 

[Chopper Dave]

i take it this is a tuffy, anybody has an idea i know gas man can answer this one. also guys were can i find a stator for this bike big dog said its on backorder any other website were i can find one.......

maybe try Nelson @Wicked Bastard Cycles on here

 

[bad chad]

thanks dave i will check it out, any idea on the clutch basket?????????

 

[Chopper Dave]

I have a pic from last Aug. when Gas Man and I took off my tranny nut because it was loose and red loctited it at 100ft lbs. yeah...Gas would be able to answer that question....he probably has some pic's too! I haven't had my clutch out so I'm not sure....but I think you would have to remove the clutch basket to get access to the bolts for the sprocket

 

[bad chad]

yeah i know hes probaly busy, hell get around to me. thanks for the pic we got it all off just not sure if its possible to break apart the basket from the sprocket to tighten the allen bolts,,,,,, it looks as if its pressed through the bearing, maybe not though.........oh where oh where could gas man be oh where could he be......... he just to smart on the dogs.....

 

[Chopper Dave]

yeah i know hes probaly busy, hell get around to me. thanks for the pic we got it all off just not sure if its possible to break apart the basket from the sprocket to tighten the allen bolts,,,,,, it looks as if its pressed through the bearing, maybe not though.........oh where oh where could gas man be oh where could he be......... he just to smart on the dogs.....

he was out of town for the last 4 days....so he is probably trying to catch up....yep.. he is a good guy to have for a friend!

 

[Raywood]

The clutch hub is pressed out. See the How-To in that section on installing the Bandit Clutch and also a How-To on installing a Compu Fire stator.

http://www.bigdogbiker.com/forums/how/7511-how-charging-system-upgrade-40-amp-3-phase.html

http://www.bigdogbiker.com/forums/how/2329-how-bandit-superclutch-carrier-install.html

 

[bad chad]

guys i checked the how to's out yall reffered. only info i seen is when it was mentioned he took to the dealer and drop it off to get pressed out and pressed on new bandit cluth assembly. so i guess i will take up to shop i just seeing if it was possible without having to take it to a press..

 

[Raywood]

guys i checked the how to's out yall reffered. only info i seen is when it was mentioned he took to the dealer and drop it off to get pressed out and pressed on new bandit cluth assembly. so i guess i will take up to shop i just seeing if it was possible without having to take it to a press..

No, you need a press and it doesn't have to be the dealer. I took mine to the local auto parts store that has a machine shop.

 

[05chop]

Redneck press! take a bottle jack place under your heavy truck rear axle and press away.

 

[Gas Man]

Sorry for my delay... as Dave said... been busy trying to catch up.

Did you get everything answered?

 

[bad chad]

yeah, thanks gas got it pressed out today and ready to reinstall just wanting for stator to arrive then i will have my buddys bike back on road.....

 

[stlmikie]

The dealer in St. Louis has one.

i take it this is a tuffy, anybody has an idea i know gas man can answer this one. also guys were can i find a stator for this bike big dog said its on backorder any other website were i can find one.......