Chrome neutral switch cover

Energy One
S

stryfox

Active Member
Ok I could not stand looking at the ugly gold neutral switch with the over sized connector sitting on top of my chrome BDM baker trans top.
I ordered a Kuryakyn frog cover, no matter how much I ground off of it there was no way to make it fit.
Anyway this is what I came up with, I found a chrome cover that could be modified to fit.
I am very pleased with the results!!!
No more ugly switch!!!
 

Attachments

BigDogBro1

BigDogBro1

Made in the USA
What's the cover part number that you ended up using?

Where did you get it?
 
Last edited:
S

stryfox

Active Member
I can check the part number for you but that's not what is in the picture.
The kuryakyn won't work.
I made this one from an abs part.
It's chrome plated abs plastic.
 
S

stryfox

Active Member
Ah sorry I got it at a local wheel shop, It is a 7/8 in lug nut cover that I filed down on a belt sander and drilled for the wires. I had to use different wire ends to fit under the cover. It is attached with 3M insulator type adhesive.
I had to buy 10 of them. I could modify the rest of them and ship them to members fairly cheep if anyone is interested.
 
S

stryfox

Active Member
yes it is. Ill try to get some better pics tomorrow. I took that one with my phone.
I'll see if I can make some time to do a how to also.
 
Byrddogg

Byrddogg

Active Member
stryfox said:
Ah sorry I got it at a local wheel shop, It is a 7/8 in lug nut cover that I filed down on a belt sander and drilled for the wires. I had to use different wire ends to fit under the cover. It is attached with 3M insulator type adhesive.
I had to buy 10 of them. I could modify the rest of them and ship them to members fairly cheep if anyone is interested.
Click to expand...
Very Intersted :2thumbs:
 
You must log in or register to reply here.
Top