Rodwho
Member
Good Day All:
I have an issue with my bike not wanting to keep my battery charged. I replaced the battery, so I'm fairly sure it's either the voltage regulator or the stator. Seeing they both are over 10 yrs old I decided to replace both. The link below is what I'm wanting to buy, but they are out of stock. The last picture of the sales page from the link below shows a cover page for the item, it has both Compu Fire 55520 & Compu Fire 55540. Does anyone know what the difference is in these two? From going back and forth on the two eBay listings I don't see anything different other than about $30. Thanks in advance.
www.bigdogpartskingpin.com
I have an issue with my bike not wanting to keep my battery charged. I replaced the battery, so I'm fairly sure it's either the voltage regulator or the stator. Seeing they both are over 10 yrs old I decided to replace both. The link below is what I'm wanting to buy, but they are out of stock. The last picture of the sales page from the link below shows a cover page for the item, it has both Compu Fire 55520 & Compu Fire 55540. Does anyone know what the difference is in these two? From going back and forth on the two eBay listings I don't see anything different other than about $30. Thanks in advance.
BIG DOG MOTORCYCLES S&S CRANK POSITION SENSOR ALL 117" & 111" 2005-11
New Crank Position Sensor (CPS) for fitment on all Big Dog models from 2005-11 with S&S 117" & 111". Does NOT fit X-Wedge Big Dog 2009-10 Wolf. This is a direct plug & play for stock wiring, with 2 pin JST connector pre-installed.
www.bigdogpartskingpin.com
