changing gears/rough

[csaviano]

hey guys,
i noticed yesterday something isn't right when i change gears. its rough and i am having a hard time putting it in neutral. is there an easy fix/adjustment?

of course I am headed to MB bike week today....

any help will be great

2009 Wolf

Claudio

 

[aspen874]

I have the same problem, so any help would be appreciated

 

[Mad Dog]

Lots here on the forum have switched to the AMSOIL 75W140 gear lube. Seems to quiet things down and make neutral easier to find.
AMSOIL - Severe Gear® Synthetic Extreme Pressure (EP) Gear Lube 75W-140 (SVO)
Check this link if you are interested in buying AMSOIL at dealer cost.
AMSOIL Prefered Buyer Program. Buy Synthetic Lubricants At Dealer Cost.

 

[wyatt580]

Heim joints might need lub and make sure there straight ..if that's good you might need to adjust clutch... if clutch adjustment is good then could be the start of the clutch hub nut coming loose.....lots of how to on here..use the search option...very straight forward and simple to do you'll be on the road again....peace

 

[Olddoger]

Might try changing the primary oil. While in there check the chain adjustment. Good luck!

 

[Bobby Schulz]

Easy stuff first...check the fluid level on the trans, check the heim joints to make sure they are lubed and moving free, check that the shifter lever from the shift rod to the trans is tight, then check clutch adjustment.( after this point your going in) check the nut to the engine and trans inside the primary, check for a broken clutch carrier, check for worn input shaft and clutch carrier bearings(any play that can be felt is too much), check for bent shift forks, and check the bolts that go to the shift drum. After this stuff has been checked you should find your problem. Let me know as im down here at myrtle beach and can help with some stuff