Broke timing plate screw off in the cam cover!

[96vintageclassic]

Does anyone know if they make a larger thread replacement screw to tap and thread the cam cover for? It busted flush with the cam cover trying to take it out. Not trying to spend the money for a new cam cover either. I have it off the bike and could take it to a machine shop but I doubt they will be able to get it exact for the factory bolt without hitting any of the old threads

 

[BadDawg Bill]

Try an easy out. That should work.

 

[Mr. Wright]

Any good machinist should be able to get it out. Send it to me I'll do it if you want.

 

[96vintageclassic]

Quantico harley did it for me and didn't even charge me! Grrat guys. New ignition module too and still no power to the coil...

 

[DRBarnhart]

New ignition module too and still no power to the coil...

If this helps... The ignition module has nothing to do with supplying power (12V) to your coil, that comes directly from your ON/OFF button. The wire(s) from the ignition module to the coil supplies an "intermittent" ground to fire the coil (spark plugs).

Dennis

PS I'm assuming there is no EHC in a '96(?).