Iowachopper
Member
New to the forum, new to my 2005 Chopper. I did look through the forum but didn't find the exact answer. All of the running lights work however my right blinker, horn and break lights don't work. There is a small gage blue and black wire under the seat right side not connected to anything (cut clean like never used) and a larger gage single blue wire with a factory looking barrel connector on the end next to them. Given the wealth of knowledge on here I thought I'd ask before digging in. Appreciate the help! The bike was a one owner, 7400 miles not messed with.
Figured out the unused wires are for the air ride. Going to the wiring diagram and educated myself of the control unit fault lights. My right 2 and my left rear flash when trying the blinkers. Also noticed the nuetral light isn't working.
Figured out the unused wires are for the air ride. Going to the wiring diagram and educated myself of the control unit fault lights. My right 2 and my left rear flash when trying the blinkers. Also noticed the nuetral light isn't working.
Last edited:
