Thanks for the tips guys greatly appreciate it. I'll play around and see if the magnet is the culprit but if not where is everybody buying there parts? (Switches or the EHC)
front brake magnet was not working the brake lights so I had it fixed now the EHC all LED lights stay on all the time and I turn the key and I have flashing tack, headlight,turning signal lights and bike won't start. Looks LIKE A CHRISTMAS tree :bang:
Thanks guys. I contact Curtis and see what he can do to straighten me out.
Jokester- I will report back with solution that fixed me up. As far as I hear these bikes have a terrible wiring system, I'm thinking hard about ripping mine out and installing an aftermarket one if I can find a decent one. You may want to do the same.
Okee dokee
I have cleaned and repacked with electric grease EHC. Cause I'm on my last beer and nobody else seems to know around me, what is that part on my k9??, look for a picture..
It's located on the battery case and above my EHC
Okee dokee
I have cleaned and repacked with electric grease EHC. Cause I'm on my last beer and nobody else seems to know around me, what is that part on my k9??,
It's located on the battery case and above my EHC
The EHC has a USB port, mmmmmm
Lights flashing that means your battery is weak. Charge it and give your bike another try. Or if its been awhile and you always have it on the trickle charger its time to replace battery.
That Picture (If not out of focus my eyes are going from bad to worse) looks like your ignition. It should flash when you turn your bike over. But heck like I said my eyes hurt on that picture