i pulled the bike in last saturday for a few hours. And went to leave again and it wont turn over. All the lights work the spedo does its thing it is showing a fault code so i took it in. after a week they determined it wasent the ehc i hear so much about, not battery,before i took it in i went threw the wiring everything i could read here. The dealer is telling me there not sure. Any suggestions i'm picking it up tommorow.
bike wont start
- Thread starter cockydog
- Start date
Gonna need more than that!!!
Does it turn over?
Do you hear a clicking of the selenoid?
If turning over do you have spark at the plugs?
Does it have gas?
And about a 100 more questions. Need more info. Do you have any fault lits on the EHC?
Does it turn over?
Do you hear a clicking of the selenoid?
If turning over do you have spark at the plugs?
Does it have gas?
And about a 100 more questions. Need more info. Do you have any fault lits on the EHC?
something simple---- been trying to start the bike for the last couple weeks after it has not been started for about 8 months. went through several failed cycles so today i pulled the plugs. they were a little damp with gas so i dried them off with a paper towel and put them back in. after several tries, cranked right up, old gas and all with a three year old battery that has been on a tender. think simple first.
It wont try to start,no qlicking either. the trigger wire has 5volts going to it but dosen't change when i hit the start button. I can jump the starter over but i still dont get gas. I do get a fault code when i try and start it. setting on the bike looking down i have a solid yellow light and a flashing green light across from the yellow and a solid red light when i hit the start button its the 6th light from the back it goes off when i hit the start button again.
t
t
Memory not working right now!!! 
But is the 07 Bulldog EFI? If so do you here the pump come on when you hit the start button.
By the way, your wiring system is a low-voltage system so you will only see 5 volts.
Look for a file in the Tech section on Trouble Shooting that is put out by BDM.
But is the 07 Bulldog EFI? If so do you here the pump come on when you hit the start button.By the way, your wiring system is a low-voltage system so you will only see 5 volts.
Look for a file in the Tech section on Trouble Shooting that is put out by BDM.