Bike just stopped

[fat300]

I have an 06 pitbull with around 2000 miles on it,I was riding all day ,came around a corner heard a pop & bike died.When I try to start it I just hear a clicking sound.There is juice to the battery signal lights go on but not headlight.Had the bike towed home,put the trickle charger on,battery shows good but wont start.Any suggestions... Also the headlight idot light is flashing fast but the headlight doesn't go on... I appreciate any input... Thanks

 

[WB Cycles]

Did you test the battery or are you going off the "green light" on the charger? Sounds like the battery ( I hope ) because the other nasty thought is that you blew your EHC. :bang:

 

[Daddycool]

are there any lights lit up on your EHC under your seat?

 

[fat300]

Bike just stopped cold

Yes there are lights flashing under my seat.

 

[BIG HOUSE]

Did you check the circuit breakers

 

[fat300]

no I didnt,where are the breakers.

 

[BIG HOUSE]

http://www.bigdogbiker.com/forums/technical/3022-bike-wont-start.html#post47902

 

[BIG HOUSE]

also check your lights
http://www.bigdogbiker.com/forums/h...-fault-lights.html?highlight=ehc+fault+lights

 

[Gas Man]

When you try to start it... does the turns flash on you and horn honk?

 

[fat300]

Yes my signal lights work & my horn works,I have an appointment with a Big Dog dealer on Thurs.I will let you guys know what they found.I downloaded the wiring diagram of the bike.I hope its not the EHC,If so how much are we talking about.The freakin bike only has 2000 miles on it & my warranty was up last month.I hope Big Dog does something for me.

 

[Gas Man]

That's not what I meant... When you try to start it... does it automatically honk the horn and flash the turns? Automatically.

 

[fat300]

no,nothing goes on automatically.Do you know where the circuit breaker is,I got he wirng diagram,i see a 40 amp fuse before the voltage regulator.I dont know where that is either.:bang: :bang: :bang:

 

[BIG HOUSE]

It should be a gray box near the bat with a rubber button mine is mounted so the button is on the bottom so you cant see the button unless you pull the side cover

 

[fat300]

Thanks for the info.I dropped the bike off to the dealership today.I will give you the feedback of the repairs...

 

[fat300]

Bike still in shop,battery only had 9 volts rather than 13 volts.They put a new battery in,bike still don't start.They are telling me there is no spark on the engine.Now they have to get diagnostic harness to see what fault there is.I sure hope this doesn't become a nitemare:bang: :bang: :bang: