Big Thanks to Viking! (Forwarding the favor)

[mittens]

Viking saw I wanted a Chrome elbow to my Spiked intake, and tol dhe he would hook me up. Then He happen to have the Rain sock as well.

When he sent me the elbow it was a whole intake with the sock.

Super nice, would not even let me pay for shipping. So Once I Made the intake I wanted. Chrome elbow, and my chrome spike, with a rain sock in the bag for that random day.

So I have a full intake left to pass on. for free. It was super nice of him and I would like to forward the favor. So here is the left over result. I am going to pass on. Please dont post up for this and then sell it. If you need it for your bike, then its yours. but not to just put it on ebay. I could have been the ass hole to do that...

 

[francoblay1]

:2thumbs:

 

[Trainguy]

So he's a nice guy AND has a Beautiful wife. This guy's gotta go.:roll::roll::2thumbs:

 

[Mickeetwo]

:2thumbs:

 

[jjarkys]

If someone felt obligated to give something for it and you don't want to except anything for it, I think it would be an excellent opportunity to make a donation to the site and become a supporting member. Or make an additional donation. Id be willing to do that to show support for the site. Just an idea.

 

[mittens]

jjarkys, the intake well be on its way this week. I will Pm you a tracking number when I send it.

He would not take it for free but paid me enough to donate tot he sight, so now I am a Supporting Member of this awesome sight.

 

[Viking]

So he's a nice guy AND has a Beautiful wife. This guy's gotta go.:roll::roll::2thumbs:

One brings the other...... Thanks for all your nice compliments though.:2thumbs:

Fact is; this is all thanks to Carlos (Little Boo) and not me. He gave me a stock air filter setup and shipped it for free, I could then not turn around and sell the cone and I was already a supporting member. So in honor of Carlos I just forwarded the favor.

This forum sure has a lot of cool members. :2thumbs:

 

[jjarkys]

jjarkys, the intake well be on its way this week. I will Pm you a tracking number when I send it.

He would not take it for free but paid me enough to donate tot he sight, so now I am a Supporting Member of this awesome sight.

Thxs. Worked out great.

 

[Little-Boo]

Thxs. Worked out great.

Very Cool, I like helping fellow Bikers when ever I can and it pay off cause as you can see it was a two for one favor :2thumbs:

Thanks Guys

Ride Safe

Carlos

 

[Viking]

Viking saw I wanted a Chrome elbow to my Spiked intake, and tol dhe he would hook me up. Then He happen to have the Rain sock as well.

When he sent me the elbow it was a whole intake with the sock.

Super nice, would not even let me pay for shipping. So Once I Made the intake I wanted. Chrome elbow, and my chrome spike, with a rain sock in the bag for that random day.

So I have a full intake left to pass on. for free. It was super nice of him and I would like to forward the favor. So here is the left over result. I am going to pass on. Please dont post up for this and then sell it. If you need it for your bike, then its yours. but not to just put it on ebay. I could have been the ass hole to do that...

Why didn't you use the bracket too? It will eliminate the tube and clean it up a bit....

 

[mittens]

I kept the Braket for that reason, BUT at the time I installed it, I had only 20 min to geton and be at my moms house for mothers day ha. But The braket is still mine, I did not know if that tube, was flowing something? or just a support. there is a Line comign from the back cyclender to that tube?

 

[Viking]

I kept the Braket for that reason, BUT at the time I installed it, I had only 20 min to geton and be at my moms house for mothers day ha. But The braket is still mine, I did not know if that tube, was flowing something? or just a support. there is a Line comign from the back cyclender to that tube?

You will eliminate the tube and all hoses with that bracket. Look at the back side of it and you'll see it. It is hollow to avoid the lines and vent your engine.

 

[mittens]

Looked at it for a second last night.

I have a tube that connects the heads or rocker boxes, and then a stainless line, going from the rear cylinder to the breather I just replaced ha. So if i mout this it jsut blocks the breather off? or does it just let it breath through the bracket?

 

[mittens]

Bump...

Noone has any insight to how I put tha braket, and what happend when I remove that line?

 

[jjarkys]

Got the spike. Looks great. Thanks.

Now on the hunt for a backing plate. If anyone has one.

 

[mittens]

I have the little backing plate, and the big chrome one, if someone would tell me how to install the big chrome one you can have the ltitle one you see in the pic ha.

 

[jjarkys]

I sure thought those holes were blind tapped. Is that braided hose attached to the bottom of that banjo looking fitting?

 

[mittens]

To me it looks like hte metal line connects the heads, and then on the bottom of the back head its has a breaded hose going to the breather down on the bottom of the bike.

so If I used the nice backing plate, i would be blocking off those holes and removing all the hose and breather. Not sure I am supposed to do that or not.

and are he bolts long enough?

 

[zenBD]

Good stuff... A forum is only the sum of its subjects...Great forum!

 

[aspen874]

So he's a nice guy AND has a Beautiful wife. This guy's gotta go.:roll::roll::2thumbs:

That's good, made me laugh