
Check them dam ground wires...thats what happen to me...keep it simpleGives me some hope then. But just started having trouble (as per another of my forum moans) with intermittent taco... working and then not working, now my headlight is on the blink....low beam worked then didn't, high always worked...now both don't at all...flam'n heck... will pull all the headlight apart and recheck the wiring as I did install a new Adare multese cross one..Great to hear there are BDs out there that have had no problems tho
Thanks for that, I'll pull off my tank,work through the wire harness, work through my tacho and dielectric every thing.Next time the headlight goes pull the connectors and check to see if power is going up there. If not, could be the beginning of the end for your EHC. Intermittent, unrelated electrical issues usually mean the EHC is going.
if you are going to change out the EHC i would look to other options, Wire Plus / PDM IMOThanks for that, I'll pull off my tank,work through the wire harness, work through my tacho and dielectric every thing.
Any idea what a new EHC modual is worth...hopfuly as a last resort?



I have broken both filaments in my headlight and she ran fine. It was after a Dyno. So, I assume she was shaking pretty good at over 6,000 rpm. The blue light comes on when both filaments are broken.
