Big dog signs

[MAH69]

If this violates anything let me know. I have made a few of these this one is unfinished. I sell them raw or I can paint patina or powder coat them. I think they look cool just polished up and cleared. They are cnc so if you want your customized let me know. Text is easy 620-704-3720

 

[chubs]

Size & cost?? Looks great!

 

[MAH69]

I can make all most any size this is 36 inch wide run $60 plus shipping currently from 1/8 plate. I wrap signs in cardboard so they ship flat and are very reasonable

 

[wyopsycho]

Do you have pictures of others you have done?

 

[woodbutcher]

sorry to be the debbie downer of the bunch, BUT, with Big Dog Motorcycles back in business and the copyright still in place, i think you would be way ahead to at least give Matt Moore at BDM a call and see if he has any concerns about somebody stepping on his toes and taking potential profit out of his wallet. just sayin'.

 

[MAH69]

You asking about other designs in general or other bigdog stuff?


Didn't know they were revived thought the mother company went under

 

[JR03CHOPPER]

www.bigdogisback.com

 

[MAH69]

I will send him a message. I knewill he was building bikes just didn't know the logo and company name were being used. I searched online and didn't see anything. Maby he could use one for his new store

 

[MAH69]

We make anything here is some Halloween

 

[vej]

If this violates anything let me know. I have made a few of these this one is unfinished. I sell them raw or I can paint patina or powder coat them. I think they look cool just polished up and cleared. They are cnc so if you want your customized let me know. Text is easy 620-704-3720

I'd love to have one of those that was sized to fit between the rails of the sissy bar. Since my backrest pad took wings on the road, I refuse to spend $300+ to replace it. Instead, I want to weld something like that to the inside of the backrest rails and then make the pad that bolts up to it...

 

[MAH69]

I could do a plate that fits but not with everything in the sign in posted. I will draw something up and let you see. I have the sissy bar from my 05 Ridgeback is your the tall or short

I'd love to have one of those that was sized to fit between the rails of the sissy bar. Since my backrest pad took wings on the road, I refuse to spend $300+ to replace it. Instead, I want to weld something like that to the inside of the backrest rails and then make the pad that bolts up to it...

 

[Sleekride]

Great idea and nice work MAH. Much like VEJ, I'd be interested in one for an 18" sissy bar on a K9.

 

[vej]

I could do a plate that fits but not with everything in the sign in posted. I will draw something up and let you see. I have the sissy bar from my 05 Ridgeback is your the tall or short

Tall sissy bar, with a 300 tire. Looking to weld a plate in, then bolt a pad to it...

 

[MAH69]

Tall sissy bar, with a 300 tire. Looking to weld a plate in, then bolt a pad to it...

Like this. your pad color would show thru the cut out. I would send them with room to trim for variances in sissy bar. you trim and weld onot then re-chrome

 

[MAH69]

Or I can make them an exact fit to my bike but not sure how consistent the bars are

 

[vej]

Like this. your pad color would show thru the cut out. I would send them with room to trim for variances in sissy bar. you trim and weld onot then re-chrome

Re-chrome???? You mean "powder coat"

 

[MAH69]

Re-chrome???? You mean "powder coat"

Yes I should say refinish

 

[liferider]

If Matt gives his blessing, I'll take a 36" one

 

[Nཛ͢ཀཇཧ༏ཧי]

Look good.

 

[MAH69]

I called the number listed on their website page a couple times this week and never got anyone to answer