Belt Guard Identification

Energy One
Clay9

Clay9

Member
Can anyone ID the belt guard I bought? I need to sell this one and buy the correct one for my ride.IMG_20200427_164341323.jpgIMG_20200427_164349978.jpg
 
Clay9

Clay9

Member
No roadie, nothin but chrome! The bolt holes line up, but the top of the guard touches the tire on the right. My original has a non-pointed end on the top right side. This one is pointed on top right.IMG_20200427_164253891.jpg
 
Brent Herridge

Brent Herridge

Active Member
I took this off my 06 K9, which I presume is same as your 09 K9. I took it off after it chopped a new belt to ribbons when the shop put it on too loose. Left it off afterwards - why take the chance !! It only cleared by 1/16" or less, so it always bothered me, even before the incident. Worth it to have to look at those empty bolt holes.

Just leave it off..........

1588037540078.png
1588037566571.png
 
Clay9

Clay9

Member
Brent, that looks exactly like mine! I was thinking about heating and bending it to provide more room between the belt. A local guy could re-chrome it for $50.
 
Jersey Big Mike

Jersey Big Mike

100K mile club
Clay9 said:
Brent, that looks exactly like mine! I was thinking about heating and bending it to provide more room between the belt. A local guy could re-chrome it for $50.
Click to expand...
when mine was a little closer than I preferred, I actually placed it against a wood board, place a board against the angle itself and gave it a few raps with the mallet just to tweak the angle a bit -- didn't have to go far enough that I thought I needed to add heat.
 
Mastiff Rider64

Mastiff Rider64

Well-Known Member
Looks like one for a 2005-2006 mastiff. It looks just like mine on my mastiff with the 250 tire. I'll take a picture of mine today and post it.
 
Clay9

Clay9

Member
Thanks Mastiff! Shaggy, I used a place in an industrial area here in Tucson. Not sure if they are still there!
 
You must log in or register to reply here.
Top