belt drive

[firedog19]

since my compensator is bad and I cant seem to find a replacement I am considering going to a belt drive and wonder what your experiences are with the various kinds. This is for a left side drive so Baker is out and Karata is way to expensive if they even make one to fit it.

 

[HMAN]

You can get a compensator from J&P Cycle..... BDPP has em too.

 

[firedog19]

no you cant they were imported that year and jp has no compensator with that much offset. the shaft nut is smaller on the import so you cant mix and match Bob does not have any either

 

[HMAN]

Hmmm...I'll have to check my reciept book when I get off work. I can tell ya where exactly I bought mine. Just replaced it last year I believe...?

 

[firedog19]

I ordered the one from the link you sent me and it wasnt even close. I would be interested to know just what you bought Hman

 

[Bowhunter]

I bought a Baker and have been very happy with it.

I have the compensator I took off my '09 K-9, there was absolutely nothing wrong with it, I just wanted a belt drive. I don't know if it will work on your Ridgeback, let me know if you are interested in it.

 

[firedog19]

thanks bowhunter but I doubt the offset is correct since yours is a rt hand drive. unfortunatly Baker does not make one for left hand drive. I am probably looking at BDL or Rivera Primo.

 

[KaptinAmerika]

What width are you thinking of going with

 

[HMAN]

Ok, I was way wrong. I got mine from BDPP in 2011. Here's a link to the part number.

120-000042-00 | BDM

 

[firedog19]

I am not sure Curtis but I want to minimize any issues since I ride a lot of distance.

 

[Slider]

I got a 3" primo Rivera. No problems for 8 years so far. Did replace clutch pack though last year

 

[jsub]

I've got one lying aroung the garage off a '04 Mastiff.

 

[KaptinAmerika]

I've got one lying aroung the garage off a '04 Mastiff.

A Compensator sprocket?
I'd like to get my hands on it so I could match it up to an available one in the market. I could then get it to Firedog.
How much do you want for it.

 

[Th3InfamousI]

I'm interested in the outcome of a sprocket.

But regarding Belt Drives....Ultima is pretty popular for the LSD models and it will run you around $800-1000

 

[jsub]

A Compensator sprocket?
I'd like to get my hands on it so I could match it up to an available one in the market. I could then get it to Firedog.
How much do you want for it.

PM sent