BDM Safety Recall Bulletins now online

[WB Cycles]

Here is a permanent link for accessing the Big Dog Motorcycles Safety Recall bulletins in PDF format. I would recommend using the first link as your bookmark since this will be the page to access the Safety Recalls, Service Bulletins and any other documentation I can dig up.

==========================​

Big Dog Biker Forum Page on our website:
http://www.wbcycles.com/bdm_bigdogbikerforum.php​

==========================​

Big Dog Motorcycles Safety Recall Listing on our website:
http://www.wbcycles.com/bdm_bigdogbikerforum_tech.php​

==========================​

This information should be up to date as of today, but if any of you are aware of something I missed, please let me know and I'll post it.

 

[Thumper]

Good job

 

[Tim]

Sweet!

 

[Alicat]

Excellent! Thanks...
Al

 

[BIKERDAD61]

Excellent info !

 

[Gas Man]

You are obviously a good contributor to the site for sure.

 

[dingo]

This is great, thanks!!

 

[Oscar Maldonado]

That's awesome Wb! Thanks for keeping us posted.

 

[RRRUFF]

Thanks, good info and easy to access!

 

[narow37]

Thanks WB great info.

 

[Raywood]

Thanks WB, I just copied them and included them in my service manual as completed except the VR thats still on backorder.

:flag:

 

[WB Cycles]

You're all welcome ... glad to be able to help out !

SLOWLY sloggin through the Service Bulletins now. If I don't go out of town this weekend should have them posted by Monday in the same section of the website.

 

[LDO]

Nice work WB!!!

 

[Vegas]

Thank you for posting this. I can't get my bike in the shop due to them having no V-Twin mechanice currently. My engine dies only when the weather goes from hot to cold or cold to hot quickly. Both times going up and down a mountain. Hit the run switch and it will take back off. One time it went from high beam to low beam then quit. I looked at 06v-305. I checked my ehc number and I am pretty sure mine is newer than the new part number listed. However the connectors had hardly any dielectric grease and it was dried out. I filled them to the top of the pins and that's one thing I know it's not if it happens again. I had actually taken it apart earlier today to coat the connector with dielectric grease and ran across this later. I took it back apart and filled them babies up. Great info man. Get those bulletins up to that would really help us guys with lousy dealer access.

 

[kickstart]

Nice :up:

 

[WB Cycles]

You're welcome Vegas.... actually working on the Service Bulletins today. Waiting on a few more emails to compile the info.

Bad deal on the lack of service you're seeing. I've been pretty lucky on that side but know a lot of guys who have other stories.

 

[BIG HOUSE]

Thanks WB this will be helpful to all

 

[f-okie]

Nelson gets another "at a boy" :2thumbs:

 

[whatever01]

I have tried several times to open these sites listed and for some reason it wont come up. Any ideas?

 

[WB Cycles]

Will be back up shortly ( Safety Recall items ). Had a slight problem on the file structure on the website. Sorry for that !! :bang: