BDM Mirror Adapters

[Gas Man]

If you want to change them... you need to get the adapters as shown below and in this thread http://www.bigdogbiker.com/forums/customizing/110-aftermarket-custom-mirros-60-a.html

From plain and flat

To the new HOTNESS

As said... BDM adapters... however if you have access to materials... here's what you need

OD 12.67mm / .498"
ID 8.37mm / .329"

Lengths
R 19.06mm / .750"
L 13.91mm / .598"

 

[R&B_Cycle]

We have some adapters that look better with the square stems that most aftermarket mirrors use, the ones from big dog are round as you can see in the picture above the square stem sitting on top of the round adapter doesn't look very good, the adapters we have are squared on the top to match the stems and looks much better

 

[Switchblades]

Gas looks great. Ive got the same adapters but I cut them down so the square base was flush on the left HB & as close to flush on the right HB

Hey R&B, I checked your web site & could only find BDM adapters. Can you take a pic of the ones your speaking obout & post them

Thanks Rob

 

[Staffy]

R&B - Is this a KIT i.e. bolts included (coarse and fine threads?)

 

[R&B_Cycle]

Gas looks great. Ive got the same adapters but I cut them down so the square base was flush on the left HB & as close to flush on the right HB

Hey R&B, I checked your web site & could only find BDM adapters. Can you take a pic of the ones your speaking obout & post them

Thanks Rob

Here are some pics of the kit we offer they sell for $22.50

 

[Gas Man]

That's really good too R&B

 

[TexasMike]

Here are some pics of the kit we offer they sell for $22.50

Hello R&B - I saw this old post showing the mirror adapters with the square ends on top to meet up with square stem mirrors. Do you guys still sale those? If so, how could I purchase some?

Thanks Mike

 

[Mr. Wright]

Give Eric a call at HDM and see if he has any. If not, I can make you some.
www.bigdogpartskingpin.com

 

[TexasMike]

It does appear that the BDM adapters are still available, but I was really wanting to find the special ones with one end being round to fit into the space on the controls & the other end being square to meet up with the square stems, like the ones R&B posted. I really only need the spacers, as I'm going to have to purchase some longer metric bolts for the actual mirrors. My bike actually had a set of BDM adapters that the original owner put on, that were used on a set of aftermarket mirrors. I took it all apart & tried to reuse the spacers & bolts on a new set of mirrors & stripped out one of the stems. Lesson learned... I bought another new set of mirrors (much nicer $$) & want to do it right this time.