Battery smoke show

[BWG56]

Good luck Ron. I do like Carlos' idea (Little-Boo) about the seat pan. I did something very similar to ensure the posts would not make metal to metal contact through to the seat pan on my bike. Either way, doing so adds another layer of protection.

I took a 2"x2" piece of 1/16" rubber and put it over the top of the positive terminal just in case it would touch

 

[BWG56]

Doesn't the red boot cover the battery lug?

On the precharged AGM's, they have the red cover, on the ones you add the juice, they don't ship them with the red covers because they are not charged in the box.

 

[Matheny 514]

I took a 2"x2" piece of 1/16" rubber and put it over the top of the positive terminal just in case it would touch

Excellent Ker, sounds like that will last for a while for sure. Then adding the volt meter you have above your speedo to monitor your charging system, you are set with yet another layer of protection , nice set up for sure.

 

[KaptinAmerika]

I think I seen only one, maybe two on here Curtis? Two others here locally and their complaint was cracked terminals and the customer service when trying to get them replaced. I myself, don't have experience with this brand...

Thanks for the info Brew

 

[Ron Sirianni]

A good thing is these wires don't scare me. I wanted the WP gone and also no paint damage thanks to the antigravity lithium. I'm thinking I made the right choice it could've been way bad. I'm going to get started soon I will keep you posted. Thank you all for your input. Ron