Bandit Machine Works superclutch

[Tye2013]

Need help: I have a 2013 Fatboy FLSTF. Installed the bandit machine works superclutch. They are very specific about getting 0.070 travel on the pressure plate and I cannot get it no matter what I do. I have replaced every working part from the clutch lever to the transmission and still can’t get it. Can anybody help me please!?!? I’m going nuts here….

 

[HMAN]

Welcome from Kansas. After looking @ the install papers, I would check the stack height and make sure there isnt an ez pull on it? Pop the clutch cable cover off n double check, especially if you are not the OG owner. People do some weird crap.

 

[Tye2013]

I am the original owner and I am mechanically inclined. I followed the directions line for line and I’m in spec for every measurement. I’ve checked for warped plates even know they’re brand new

brand new:
Barnet cable
Baker inner and outer ramps with new balls
Baker throw out bearing
Push rod

 

[HMAN]

Dang, Id be giving Bandit a call n have a chat with them. They may have more insight. I just had to do that with Baker. Simple crap can be evasive @ times and drive ya nutz.