BAKER OPEN PRIMARY

[mask]

Okay I finally got the primary installed with no extra parts laying around. The bike started fine, I go to put it in gear and the bike lunges forward violently as if I did not apply the clutch. I adjust the clutch and the same thing happens. Suggestions?

 

[New Boots]

INSTALLATION PROCEDURE CHANGE
12-15-08
Now included in the BAKER SDB (Synchronous Belt Drive) Kit is pn 3096-
DSSC and pn 3196A-DSSC; inner and outer ball and ramp. The inner and
outer ball and ramp will come in all kits with the suffix -08, example: BDBDM-
0-08. Starting in 2008 Big Dog Motorcycles changed the inner and
outer ball and ramp for ease in clutch lever effort. In order for the BAKER
Synchronous Belt Drive clutch to disengage properly the inner and outer​

ball and ramp must be changed per your Factory Service Manual

. Factory

clutch cable and clutch adjustment procedures are not affected by the new​

inner and outer ball and ramp.

This is now part of the kit.

________________________________

Did you change it? :flag::flag::flag::flag:​

 

[mask]

No I did not receive a new ball ramp with the open primary , my bike is an 07 I will call baker tomorrow to see if they left that part out

 

[New Boots]

Well what was it? Did ya fix it?