knothead
Second Chance Customs
Your 04 chopper has a 1 7/16 offset... this open primary will only work on 05 and up models
Baker open primary 300 / 330
- Thread starter LHS
- Start date
Mastiff Rider64
Well-Known Member
Is there a way to make it work on my 06 mastiff with a 250 tire?
LHS
Active Member
This is the one you would need to fit your 06 mastitiff
P/N 250-BTD; Big Dog, 2005-up with 250 size rear tire (1/2” offset powertrain)
This is the part number of the one I have
P/N 300-BTD; Big Dog, 2005-up with 300/330 size rear tire (zero offset powertrain)
You would have to have a 1/2" adapter plate Machined out and I would also think you would need an offset clutch basket. I'm not positive on that but it kind of stands to reason or you would have to Shim it out with a spacer to match the 1/2" Offset So your pulleys would line up again.
I don't know how Baker took care of that issue I didn't really pay attention how long the input shaft was on the transmission.
P/N 250-BTD; Big Dog, 2005-up with 250 size rear tire (1/2” offset powertrain)
This is the part number of the one I have
P/N 300-BTD; Big Dog, 2005-up with 300/330 size rear tire (zero offset powertrain)
You would have to have a 1/2" adapter plate Machined out and I would also think you would need an offset clutch basket. I'm not positive on that but it kind of stands to reason or you would have to Shim it out with a spacer to match the 1/2" Offset So your pulleys would line up again.
I don't know how Baker took care of that issue I didn't really pay attention how long the input shaft was on the transmission.
Last edited: