Are all pulse counts the same?

[BATMAN2696]

I have an 04 chopper that I need to replace the speedo, I know the Dakota Digital are nice but I really like the sweep needle. Since my old trip does not work either I cant see what the pulse count is. Are they all the same, any suggestions on a replacement speedometer with the sweep needle. The one I really like is a douple sweep needle, One for the speep, one for the tach. Thanks, Keith

 

[Atortella]

They are not all the same. In my service manual for 04 and older has a table showing the counts. PM me and I'll send you an electronic copy of the page with the table.

 

[MTpockets]

I have an 04 chopper that I need to replace the speedo, I know the Dakota Digital are nice but I really like the sweep needle. Since my old trip does not work either I cant see what the pulse count is. Are they all the same, any suggestions on a replacement speedometer with the sweep needle. The one I really like is a douple sweep needle, One for the speep, one for the tach. Thanks, Keith

Ive got a stock speedo off my 04 chopper if your interested PM me.

 

[BigDogBro1]

Aftermarket speedos normally give the installer the ability to calibrate the pulses per mile/kilometer during installation.

The thing that would cause problems are the electrical interface signals that the speedo/tach would require. More than likely the signals should be compatable seeing how the product was designed to be typically used in motorcycle installations.

 

[BATMAN2696]

Thanks for the replies, PM's sent