Anybody try this?

[jbs1968]

You'll be happiest with the 9 plate setup, and the ball & ramp set up for a 12 plate. Call us crazy, but we do it all the time, and our customers love us for it. (More throw) You will end up with a friction disc directly against the pressure plate. Any questions, fell free to give us a call.
C.A.Jones V-Twin | Custom Builds, Parts & Service

This is from C.A.Jones, I am going to replace my clutch on my K9 soon seriously thinking about trying this any input would be greatly appreciated.
Thank you Joe

I copied this from another post that C.A. Jones had replied on.

 

[HMAN]

If Will and Doug told ya it would work better, take it to the bank. These guys know their shit....

 

[Th3InfamousI]

I run the 9 plate setup that came on my 07. It works fine. I assume it's the ball and ramp for the 9 plate too considering I never changed it, but who knows.

Sent from my 831C using Tapatalk

 

[jbs1968]

Thanks for your input, I am sure that C.A. Jones knows these bikes, I am just curious why Baker says you need to upgrade the 9 plate with a easy pull ramp and see what else this will do for my K9.
Thank you Joe

 

[BWG56]

Less plates, less distance to move them to separate. for instance, lets say if you have .003 between the 9 disc's =.027. Now the 12 disc's =.036. So the clutch lever only moves so far no matter which disc set up is in there. But the soft pull has a different ramp that requires a longer throw and if you use less disc's, it will still separate them enough to disengage.