Another Carb question

[RoofDude]

Was messing around in my garage today...was looking at my Pitbull up close... took these pics of the tube coming out of my carb. thought I'd get youse guys' thoughts.....

 

[NascarNutCase]

Looks like that's your carburetor overflow hose. Just make sure it's going to the rear of the engine.

 

[RoofDude]

Looks like that might be the carburetor overflow hose.

Is it a problem for it to be melted on the end ? Are they all routed to the same place..?

 

[NascarNutCase]

Try re-routing it away from where it was sitting.

 

[NascarNutCase]

Should be routed in front of the push rods going to the rear, not behind the push rods. Too much heat.

 

[V]

Bowl overflow tube as said. You can get a new for cheap. Fuel will also slowly melt the end of the tube as well. Should run down between the tansmission and the engine just below the trans mount plate so if you get a drip or overflow it go on the ground and not the bike.