Sweet !!
! Looks great. When ya gonna do mine?...lol
! Looks great. When ya gonna do mine?...lol
Bring it on.Sweet !!
! Looks great. When ya gonna do mine?...lol
Next time I swing up through the Ozarks to the "show me state"... I'll be sure to give ya a holler !!!Bring it on.
My place is always open to yea,Next time I swing up through the Ozarks to the "show me state"... I'll be sure to give ya a holler !!!
Ditto.My place is always open to yea,
Yup, that's the plan, unless I hit the lotto, then it would a trip to Big Dog for a 330 K9, and a Mastiff for the wife.So what now? Two more years and you do it all over again?
Chuck those LT spacers on the lifters in the trash. They don't help the noise any thats for sure and just make them a pain to adjust.Seat fits. I got a matching back rest too, but I still need to make a bracket for it.
Only did about 20 miles this afternoon. Going to have to readjust the push rods, lifters never quieted down. I don't know how the shift rod got out of adjustment. It shifts and down shifts ok, but it won't go all the way into 1st gear. My speedometer is off 1 mph, and the carb still needs adjusted. But it passed inspection, and I got another 2 years on the tags.
They were quite. I had to pull the nose cone and reseal some oil seepage, so I had to readjust. The problem I'm having is my valve springs are so weak, It's hard to bleed the lifters out. I had to do them twice the last time too. No biggie.Chuck those LT spacers on the lifters in the trash. They don't help the noise any thats for sure.
Sent from my 2PS64 using Tapatalk
Yea...the LT kit definitely makes your adjustments less forgiving in terms of noise.They were quite. I had to pull the nose cone and reseal some oil seepage, so I had to readjust. The problem I'm having is my valve springs are so weak, It's hard to bleed the lifters out. I had to do them twice the last time too. No biggie.