2008 Mastiff fuse box location

Energy One

Nvstoker

New Member
I recently purchased a 2008 Mastiff. It ran when I got it but after replacing the battery and disconnecting and reconnecting the right hand throttle control to reconnect an idle cable, the bike does not fire. It cranks but will not start. I’ve checked all connections to make sure I didn’t miss anything. Is there a fuse panel on these bikes somewhere?
 

nvcollins

'08 Mastiff
Hello and welcome from Southwestern Virginia Highlands, The Back Of The Dragon. There should be a breaker on the left side of the battery box. If your bike is stock, then there should be a circuit breaker between the voltage regulator and the battery.


Sent from my SM-S906U using Tapatalk
 

Rottweiler

Well-Known Member
Supporting Member
Sounds like no spark. Turn on key, head light and running lights plus speedo should come on. Press the run button you should get power to the ignition module. Press the start button the ignition light should blink when the motor spins.
 

Nvstoker

New Member
So just retraced everything and I think I found the issue. Bad RH control board. When I press on it the light on the ignition module lights up (was actually able to start it). Is there a source for this board?
 

HMAN

I just like my Freedom
Supporting Member
So just retraced everything and I think I found the issue. Bad RH control board. When I press on it the light on the ignition module lights up (was actually able to start it). Is there a source for this board?
 
Top