2006mastiff exhaust

Energy One

mjsk9

Active Member
Lifetime Supporting Member
Agree awg.... Hmmm...... The only thing I can think of and I don't believe anyone asked.... is your V&H a 2 into 1? My V&H 2 into 2 used the bracket I previously posted so have to think it might be a 2 into 1?
 

mjsk9

Active Member
Lifetime Supporting Member
You might have to go to the V&H website and search Big Radius to look at the pipes you have? There are 3 pages and 30 results that come up with that search. click on each one and open the instructions to see a potential bracket fit?


1600451514539.png

Pictured below is a similar bracket but reversed?
1600451670101.png
 
Agree awg.... Hmmm...... The only thing I can think of and I don't believe anyone asked.... is your V&H a 2 into 1? My V&H 2 into 2 used the bracket I previously posted so have to think it might be a 2 into 1?
Agree awg.... Hmmm...... The only thing I can think of and I don't believe anyone asked.... is your V&H a 2 into 1? My V&H 2 into 2 used the bracket I previously posted so have to think it might be a 2 into 1?
Big r
 

mjsk9

Active Member
Lifetime Supporting Member
The big raids are two pipes
No..... they have both see below and why I asked. Have never seen the picture of your bracket for a 2 into 2 for a K9 or Mastiff unless it was modified by the original owner?

1600456790801.png1600457175054.png
 
Last edited:

mjsk9

Active Member
Lifetime Supporting Member
The bracket I need is pictured above. Thanks
Like I mentioned, you may want to start at the V&H site, look at every (30) Big Radius exhaust available (2 into 2 and 2 into 1) click on each and click on the pdf instructions to see what bracket is provided. Then talk with the representative to see what MIGHT work.

I am "exhaust"ed, pun intended so I am OUT!!!!!! Good luck!
 

Scott J

New Member
where can I find the correct exhaust bracket for my 2006mastiff. I'm installing a set of Vance and hines big radius and the bracket that came with kit won't fix. I need the flat offset bracket.
where can I find the correct exhaust bracket for my 2006mastiff. I'm installing a set of Vance and hines big radius and the bracket that came with kit won't fix. I need the flat offset bracket.
 
Top