2004 photo under seat

[1 B.M.F.]

Does anyone have a photo of 2004 wiring under the seat. Mine has been re wired it has axels ehc but it’s wired screwy just looking for something to go off of.

 

[Twincam8888]

Here is the 2004 Mastiff that I just bought. Your's looks pretty tidy in comparison. I don't even know what I've got yet but it runs. LOL

 

[fiftyonefifty5150]

Hopefully this helps you out. Let me know if you need another angle or a close up of anything.

 

[1 B.M.F.]

Thanks, but your right nothing like mine.i appreciate the fast response someone will have one.

 

[Th3InfamousI]

Here is the 2004 Mastiff that I just bought. Your's looks pretty tidy in comparison. I don't even know what I've got yet but it runs. LOL

You have a wires plus module....there is almost no way to make that thing look clean and I would consider yours about as clean as you could get..

That company is no longer in business and was one of the first units available....lots of improvements since then.

 

[1 B.M.F.]

Yes sir one from the tank back thank you

 

[Th3InfamousI]

Does anyone have a photo of 2004 wiring under the seat. Mine has been re wired it has axels ehc but it’s wired screwy just looking for something to go off of.
View attachment 74409

I don't see anything really screwy except for that relay......what the heck is that for?

 

[1 B.M.F.]

The big red wire coming out of EHC. Where does it connect to??

 

[Th3InfamousI]

The big red wire coming out of EHC. Where does it connect to??

The one with the fuse on it? Should have that separate fuse and that circuit breaker is for the VR really. both is best, CB is 40 amp the fuse is probably a 20-25.

 

[1 B.M.F.]

My big red wire coming out of ehc goes to the relay I have no idea where those wires go.

 

[fiftyonefifty5150]

 

[1 B.M.F.]

 

[1 B.M.F.]

Got it : to battery with fuse

 

[Th3InfamousI]

I can't tell by the pictures as I lose track of the wires...but just to make sure...

IT's a one way Circuit Breaker for proper setup "AUX" or Silver Post should be wired to the Battery and "BAT" or gold post should be wired to VR to protect the battery from any VR overcharging issue.

Yours looks opposite...which by obvious definition is an understandable misconception during someone installing.

 

[1 B.M.F.]

5150 I do know you need to swap your VR wire to the copper one and your red wire to the other on your in line. You can double check that but I think your is backwards

 

[1 B.M.F.]

this says ground but it going to battery on negative side of battery

 

[Jersey Big Mike]

View attachment 74416
this says ground but it going to battery on negative side of battery

Neg side of battery is ground.