2004 MASTIFF WONT START

[DWIGHTDUKE]

I just got my bike back from the shop, I had it in for its 2500 mile service.
Everything was running fine. I took off the rear fender to add a sissy bar and put it all back together. WHile putting it back together I accidentally bumped one of the battery wires with the strut. The lights and electrical seem to work. It turns over but it wont fire. THere is fuel getting to the carb. HOwever if I put a spark plug on one of the plug wires there is no spark. Could I have fried the coil? One of the nicest days of the year here in the northwest and my damn bike wont start. ANy body got any ideas??
Much appreciated.

 

[Raywood]

Welcome to the site. I see you live here in the Great NW!!! We have a quite a few of us here in your area.

As for your bike I would check the circuit breaker and see if you tripped it.
Keep us updated on your progress.

Later,
Ray

 

[DWIGHTDUKE]

Hello Ray,
Thanks for the welcome and thanks for the reply. I checked the circuit breaker and it was fine. Apparently the circuit breaker is only for the v/r, it doesnt have any thing to do with spark. I had to trailer it over to STEEL DREAMS and they figured out that it was the EHC module. So the dog is in the shop for a week as they had to order the part.
Thanks again,
Duke

 

[Raywood]

Didn't realize you were a local member up here. If you need any other help you have lots of us here to hit up!

Wish you could be with us today for our Hurricane Ridge ride.

Thomas, Gary and Tonya will take good care of your scoot.

Later,
Ray

 

[DWIGHTDUKE]

Awe Man!
Hurricane ridge sounds awesome. You had to rub it in?
Yeah Thomas is the man, he seems very thorough. And Tonya
is awesome too, very knowledgeable and quite helpfull.
Enjoy your ride in this beautiful weather.

Peace
Duke

 

[KnotSo]

Welcome Aboard!

We have been waiting for you to show up, now let's ride!

Gonna need pics of your scoot soon.

When do you pick up your pup?

See ya!