2004 BDM Chopper

Energy One

No H2O

Active Member
Supporting Member
Wires Plus, the brand, is not longer in business. Given that 04 was not a good year for BDM electronics (as I can attest to), it may be a good time to install the RIP kit. Some other more experienced forum members may have other/better suggestions for electronics replacements
 

knothead

RIGID4LIFE
Supporting Member
I agree with seal rider new harness and axels....that will be what i do when both of my 04 take a shit with the wireplus...
 

No H2O

Active Member
Supporting Member
Is it the turn signal module itself that's damaged or just the wires going to the module?
It's hard to tell from the pic how the wires connect to the module but if it were me and everything else was working fine prior I'd just buy the connector(s) to the module at the Auto parts store and reapply new connectors to the damaged wire(s) and plug them back into the module. Are you able to post a picture of the wires entering the module?
 

Rottweiler

Well-Known Member
Lifetime Supporting Member
Supporting Member
Question
Was it the left clutch side that rubbed though? Tire against the inside of fender? If so same thing happened to me on my 2004. I changed the wheel spacers to move the tire back in center of fender.

Sent from my Life One X3 using Tapatalk
 

Boulder4x4

New Member
Question
Was it the left clutch side that rubbed though? Tire against the inside of fender? If so same thing happened to me on my 2004. I changed the wheel spacers to move the tire back in center of fender.

Sent from my Life One X3 using Tapatalk
That is exactly what happened. the more I rode it the more it moved. I didn't notice until it was too late.
 

Mr. Wright

Guru
Lifetime Supporting Member
Supporting Member
Isnt it the small letter/envelope NEXT to the bell? Bell is notifications and the letter is your Personal Messages.
Yes, but he has to have 25 posts before he has Personal Massage. So I had to post it on his own page. Yes, I know everyone can see it there.
 
Top