2003 big dog chopper clutch

[Thunder4000]

Does anyone know what clutch was used on 03 chopper open primary dry clutch. When in stop an go traffic it wont release when lever is pulled in. But once back on open road it works fine. How to adjust this style of clutch

 

[knothead]

That's is common with any clutch especially open primary clutch in stop and go traffic because the clutch is getting hot...try to use neutral as much as possible in traffic

 

[Thunder4000]

Thank you I wasn’t sure if the clutch was getting ready to need replacement or adjustment. It does let out a small squill when taking off from a stop

 

[knothead]

That's because the clutch has got hot and its has glazed over a little

 

[Thunder4000]

Is that anything to worry about

 

[Mr. Wright]

Well the dust out of it with an air hose will help a little bit. I know mine rattled and squealed and squirrel a lot, but I never had any problem out of it

 

[Mickmorris]

Post a pic of the primary. Do what Mr. Wright suggested…Periodically you will need to take a air hose and blow all the fiber dust out. Should help for sure.