2003 backrest hardware

[Chopper Dawg]

I just bought a backrest kit for a 2003 chopper with a RT frame.

Here's the problem. The hardware was rolling around in the box. I am pretty sure that some of it is missing.

Can anyone look at the attached pic and tell me what I am missing and what the aluminum spacer thing is for?

I would like to see a hardware list and a set of directions if anyone has them!

Thanks guys and girls. This site rocks!

 

[waykool]

You should have
2 aluminum spacers that will go on the backside of your blinker buckets.
2 Allen head bolts that go inside the fender.
2 3 hole backing plates that go inside the fender.
2 Blinker bolts.
2 Allen head set screws

 

[Chopper Dawg]

So I am missing one turn signal spacer and one hollow turn signal bolt?

Anyone have any of the items I need? I am willing to buy them.

Thanks!

 

[waykool]

Trust me when I say that you will not need the parts that you are missing. Although a installation guide would be useful. I may have one in pdf format that I can E mail you. If not I can walk you through the process.

 

[Chopper Dawg]

I guess the old turn signal bolt will work? You don't need to space the signals?

Awesome!

I am sure I can get it installed. Doesn't look like rocket science. Thanks for the information Waykool !

I appreciate your help!

 

[waykool]

Yup. You got it. The old signal bolts and spacers will work. Will need to drill two holes in the fender to mount the new struts and drill out the threads in the blinker can