what i know and whats been done.
New 3.0 Dyna coil installed this year ran after install.
Sat for 6 plus Had hip replaced
wire checked red wire to coil insuring voltage presents 12.3
wire checked blue wire from coil to plug 26 ohm 0L 0.0
yellow lite on BD4121-1D flashes during start attempt red light bellow does not illuminate during start attempt or pwr on.
Red light on start module 170-00251 flashes during start attempt.
a know good coil and wires were slaved in with no start.
No fire to coil
Plugs were also changed from a running bike.
So which item do i buy the 170-00251 or the BD4121-1D? Or Both?
New 3.0 Dyna coil installed this year ran after install.
Sat for 6 plus Had hip replaced
wire checked red wire to coil insuring voltage presents 12.3
wire checked blue wire from coil to plug 26 ohm 0L 0.0
yellow lite on BD4121-1D flashes during start attempt red light bellow does not illuminate during start attempt or pwr on.
Red light on start module 170-00251 flashes during start attempt.
a know good coil and wires were slaved in with no start.
No fire to coil
Plugs were also changed from a running bike.
So which item do i buy the 170-00251 or the BD4121-1D? Or Both?