09 k9 585 cam change dyno results

[BigMex]

Just had the bike dynoed today at Durango Harley Davidson.Since the last dyno I installed a 585 lift cam and replaced the pluggs with e3. I don't have no way to show you the sheet. Here are the first set of numbers before the modification.

3/9/11 Max Power = 99.54 Max Torque = 112.41

After

10/8/11 Max Power = 105.04 Max Torque = 120.23

 

[pknowles]

Are you running stock breather and pipes?

 

[BigMex]

I'm running stock breather with k&n filter and supertrapp drag pipes.

 

[LamboV12]

Do you know what size the stock cam was before the 585?

 

[Nukeranger]

Just a guess but probably a 546.

 

[BigMex]

Yes, 546

 

[erldawg]

Just a guess but probably a 546.

:iagree:

You may get a bit more out of it if you added some back pressure baffles. Now that's assuming you are running straight through drag pipes.

 

[BigMex]

The power was still climding at the top end on the graph, I only let them pull 5000 rpms. The tech said it had more to go. I personally don't know much on how to read the graph but the lines never crossed. May be some one can enlighten me?

 

[BWG56]

5225 RPM's horsepower and torque will cross

 

[BigMex]

THANK YOU