07 Ridgeback Clutch Adjustment

[Billh164]

How do I adjust the clutch on my 07 Ridgeback In first gear with the clutch handle pulled all the way in the bike still walks forward

 

[Mike Toz]

Pull cable boot down and loosen lock nuts and adjust center.

 

[Billh164]

Thanks I will give it a go after work

 

[woodbutcher]

it's a little more involved than that, but it is not very difficult. go to the "how to" section and search for clutch adjustment and you will find several detailed threads that will get you there. just remember, the 1/4 turn on the push rod is not written in stone. you may have to play with that amount from 1/8 turn to a little over 1/4 turn.

http://www.bigdogbiker.com/threads/how-to-adjust-your-clutch-05-and-newer.2025/

 

[Billh164]

Ok will do. Thanks again

 

[BWG56]

it's a little more involved than that, but it is not very difficult. go to the "how to" section and search for clutch adjustment and you will find several detailed threads that will get you there. just remember, the 1/4 turn on the push rod is not written in stone. you may have to play with that amount from 1/8 turn to a little over 1/4 turn.

http://www.bigdogbiker.com/threads/how-to-adjust-your-clutch-05-and-newer.2025/

Loosen the down tube adjustment completely before you make the adjustment on the push rod, then do the down tube cable adjustment last.