chevalcabre
New Member
hi fellows.
my 04 chopper has no spark.i read all the threads on the forum and got here :
-coil has power when run button pressed. ehc light goes on when run pressed.
-so i went to the pickup. positive and negative wires all good.
-green wire is where it got weird . i had my test light .. so i tried to start the bike while touching the green wire at the same time to see if any 12v would appear... and poof !!!1 the bike starts ! it started a few times yesterday... then this morning, started, but i shut it off , restarted again but no spark... did the same thing. i cranked it, at the same time while cranking test light toucing the green wire and spark showed up and runs.. restarts again ....!
what part is causing this problem ?? seems like when i use the test light while cranking, it send a signal to the ehc and all starts working again.. spark appears and stays... any ideas ?
my 04 chopper has no spark.i read all the threads on the forum and got here :
-coil has power when run button pressed. ehc light goes on when run pressed.
-so i went to the pickup. positive and negative wires all good.
-green wire is where it got weird . i had my test light .. so i tried to start the bike while touching the green wire at the same time to see if any 12v would appear... and poof !!!1 the bike starts ! it started a few times yesterday... then this morning, started, but i shut it off , restarted again but no spark... did the same thing. i cranked it, at the same time while cranking test light toucing the green wire and spark showed up and runs.. restarts again ....!
what part is causing this problem ?? seems like when i use the test light while cranking, it send a signal to the ehc and all starts working again.. spark appears and stays... any ideas ?