LED headlight setups....post em up!

[blackdogg6164]

Hey guys, trying to narrow down my search as to what headlight setup i was going to go with on my 03 chopper. Originally i was going to go with the diamond cut headlight and LED bulb from wildsteedworx. Then i started researching the other LED setups that are out there now and im torn. Im starting to kind of like the daymaker setup that harley runs now, but I dont know if im actually going to like the look of it on my bike. So what are you guys running for headlight setups? If you have pics installed i think that would be helpful. Plus i know we have a lot of issues with the electrical system so if theres anything else i should be aware of before pulling the trigger that would be helpful too!!

Thanks guys

I did some upgrades because the burbs in Pittsburgh have some bad lighting so here goes my headlight swap (Custom Dynamics) with an adaptive headlight and some LEDs beside my tool bag. The last pic is the difference between the adaptive and daymaker i was running.

 

[Fat_Bastard]

I did some upgrades because the burbs in Pittsburgh have some bad lighting so here goes my headlight swap (Custom Dynamics) with an adaptive headlight and some LEDs beside my tool bag. The last pic is the difference between the adaptive and daymaker i was running.

I run the Sunpipe Widowmaker and it was the coolest looking UFO style at the time. Thank god it did NOT Fry my electrical grid... But I must say that your new Spiderman Lookin' deal caught my eye and made me spill my sloppy Joe all over my...,
So maybe that would be the one to get Now; if my Widowmaker burns up...

On balance the LED with heat sink and fan bulbs are the brightest but scare me with all that heat and fan stuff... but not as cool because LooKs count!

 

[Mastiff1776]

I wonder if the sunpie 5 3/4 is a direct fit for my 2007 Mastiff?

 

[mleach72]

I wonder if the sunpie 5 3/4 is a direct fit for my 2007 Mastiff?

Yes

 

[SCC007]

Sure is, and work great. I put the black one in and I think with the smoked lenses on the turn signals it looks great!

 

[Mastiff1776]

Sure is, and work great. I put the black one in and I think with the smoked lenses on the turn signals it looks great!

Thanks. Did you have to remove a stock headlight gasket rubber piece to install it? I read something about that.

 

[mleach72]

Thanks. Did you have to remove a stock headlight gasket rubber piece to install it? I read something about that.

Yeah, you can get rid of that rubber gasket. The Sunpie is a sealed unit, so the gasket isn't needed. That will free up a little bit of room. Sometimes it's a tight fit getting everything back into the bucket.

 

[SCC007]

I couldn't get the rubber gasket and the sunpie to fit so I didn't use it. I do recommend cleaning up everything in the bucket and also check the electrical connector while you are at it (if it is burnt or discolored replace it).

 

[nobbyjohn]

Sent from my iPhone using Tapatalk

 

[fecalpeanut]

Got this one cheap off Amazon and made it work.

 

[blackdogg6164]

Hey guys, trying to narrow down my search as to what headlight setup i was going to go with on my 03 chopper. Originally i was going to go with the diamond cut headlight and LED bulb from wildsteedworx. Then i started researching the other LED setups that are out there now and im torn. Im starting to kind of like the daymaker setup that harley runs now, but I dont know if im actually going to like the look of it on my bike. So what are you guys running for headlight setups? If you have pics installed i think that would be helpful. Plus i know we have a lot of issues with the electrical system so if theres anything else i should be aware of before pulling the trigger that would be helpful too!!

Thanks guys

These are all the lights on my bike. The headlight is a Probeam adaptive