No red LED on thunder heart ignition module

[JDogg]

Hey Boss great find, was putting it all back together after paint grabbed the TH to screw it down accidentally touched something and poof, ground wire toasted. What was your fix? Thought about paper clip in there as it's needed for ground not power with the original pin being that small as well. Thank you in advance for your help.

Sent from my SM-G986U using Tapatalk

Also guess as it's the main harness side could just clip the ground wire going into the connector from the TH and just give it, it's own ground directly?

Sent from my SM-G986U using Tapatalk

 

[Th3InfamousI]

Also guess as it's the main harness side could just clip the ground wire going into the connector from the TH and just give it, it's own ground directly?

Sent from my SM-G986U using Tapatalk

Yep, just run a ground wire with a little terminal to one of the 2 ignition mount screws. That will fix it, if the ground is the only issue...

 

[Mr. Wright]

That's what I did to mine

 

[JDogg]

Right on! Thanks!

Sent from my SM-G986U using Tapatalk