This look ok?

[Tubolove]

Speed sensor working speedometer is not though it does sweep all the way to 140 when the bike is turned on and again when started.

Can’t seem to find a wiring diagram for a 2002 big dog. Does this look OK? There’s an extra plug should be plugged into something?

 

[Jersey Big Mike]

Have you tried recalibrating the speedo and seeing what happens.
The 2002 manual in the drop box connection does tell you how to calibrate .
Is that connector insert well into the board (hard to tell from pic.

 

[Tubolove]

OK I got out my handy-dandy volt meter and it looks like there’s a break in the continuity on the green wire between the speedometer and the speed sensor. When I roll the bike the volta go up and down at the connector near the battery and then I trace the wire up under the tank and into the back of the speedometer the green wire has no continuity or voltage jumping up and down when I move the bike.


Sent from my iPhone using Tapatalk

 

[Tubolove]

I’m thinking that extra plug after looking at it is pre-wiring for maybe a tach. It uses the ground and 12v+ From the speedo and the yellow wire has continuity with a yellow wire that’s near my battery/ehc that is not hooked up to anything.


Sent from my iPhone using Tapatalk

 

[DynoDave]

 

[HMAN]

I’m thinking that extra plug after looking at it is pre-wiring for maybe a tach. It uses the ground and 12v+ From the speedo and the yellow wire has continuity with a yellow wire that’s near my battery/ehc that is not hooked up to anything.


Sent from my iPhone using Tapatalk

I was gonna say the same. More than likely a tach plug.

 

[Tubolove]

View attachment 75320

Dude this is exactly what I have been looking for!!!!! There’s nothing I can’t figure out with this!

 

[Mr. Wright]

Ask and you shall receive. ......................(most of the time)

 

[Tubolove]

Lol. Thanks a million.


Sent from my iPhone using Tapatalk