BADOG
Active Member
I have an '07 Chopper. Is this LED headlight a plug and play or are there any other modifications that have to be done during install?
On mine I had to skip the rubber gasket but the lamp assembly still was keyed as are are the backings so it shouldn't spin. The gasket is for watertight not spinning.If you do have to remove the gasket for the headlight to fit properly i would put like 3 or 4 little spot of silicone in the area where the gasket went so the headlight wont vibrate and spin inside the housing
It will fit in the stock bucket, I have an Adjure bucket on the K9, fits great. I have the stock bucket on the Bagger and that fit good too.That looks great, only problem I would have is finding a headlight bucket to fit it in. I have a wolf headlight on my 07 K9. Does it fit into the stock K9 bucket. That looks like it really help me riding at night. Anybody looking for a beautiful wolf headlight ,I would be up for some kind of trade.
Sent from my iPhone using Tapatalk//uploads.tapatalk-cdn.com/20200308/90406c4537ea716f3a03366f618a3889
.mov
https://uploads
.tapatalk-cdn.com/20200308/90406c4537ea716f3a03366f618a3889.mov
It doesnt matter honestly just need a 5 3/4 is allOne more question I promise, are your headlight buckets 7” or 9” or does it matter. Thank you for your time already order the light just looking for a hooded bucket.
Sent from my iPhone using Tapatalk
Factory is 8 1/2Can’t find anybody that has a5 3/4 by 9”bucket in stock
Sent from my iPhone using Tapatalk
