Primary gasgets -Help

[Patrick]

Putting primary back together n dealer said I need two small dime size gasgets also for my 02 pitbull primary.
I am unable to figure out where these go.
Thinking they are not for my primary which is early softail primary I'm thinking. See photos

Sent from my SM-J737T1 using Tapatalk

 

[roadie1389]

Nope. Not for this Primary. If you are only doing the outter, you have the main gasket, one for the inspection cover and an o-ring for the derby cover.

 

[Patrick]

I tore outer n inner primary down..do they go on inner?

Sent from my SM-J737T1 using Tapatalk

 

[Patrick]

Appreciate your response ...

Sent from my SM-J737T1 using Tapatalk

 

[roadie1389]

I think there are 2 kits. I think those are for a midcontrol type primary. I am not 100% sure. But the inner only had 1 oring to engine, starter shaft seal and main shaft seal.

 

[Patrick]

Thanks

Sent from my SM-J737T1 using Tapatalk

 

[pauldeepsea]

Those are the primary stand offs ! They go on in between the inner and out primary post. Between the inspection post.

 

[Patrick]

Ok so do I need to RIP it back apart n put in or can I run without it?

Sent from my SM-J737T1 using Tapatalk

 

[pauldeepsea]

Ok so do I need to RIP it back apart n put in or can I run without it?

Sent from my SM-J737T1 using Tapatalk

Well imo I wouldn’t go tearing it back apart for this, not worth the trouble, Unless it is leaking fluid. Those gaskets go in between the 2 post that mount the inner to outer primary together around the inspection cover. It’s your call

 

[roadie1389]

Those are the primary stand offs ! They go on in between the inner and out primary post. Between the inspection post.

Yeap. I had a look at mine, there are 2 standoffs at the front of trans. Thats where they go. I completely forgot those where there.

 

[Patrick]

Thanks I was dreading ripping back apart. Horrible spun bearing noise I heard was compensator gone bad...thank god was only that. You guys know if primo rivera has shims for clutch still? Heard they were not really in business anymore.
Lastly. What jets. R u guys running and have I messed w air bleed jet?

Sent from my SM-J737T1 using Tapatalk