Not the EHC, some people won't listen

Th3InfamousI

Th3InfamousI

Administrator
Staff member
Mickeetwo said:
When I bought the PDM it was the only thing available besides the wire plus. I'll run it till it quits on me
Click to expand...
yep I had the wires Plus in the other bike that died about 7 years later. We are lucky to have the new units compared to those that's for sure

Sent from my 2PS64 using Tapatalk
 
pauldeepsea

pauldeepsea

Guru
bdm7250 said:
I replaced my PDM with the fantastic unmentionable module, there was nothing wrong with the PDM other than the fact it looked horrible, damn rats nest of wires which drove me batty every time I took the side cover off. I replaced it because of the cleaner look as well as knowing I would be trouble free from then on.. :2cents:
Click to expand...
Yes, and I have Doug’s rats nest which I decided not to use, if anyone needs it, your welcome to have it


Sent from my iPhone using Tapatalk
 
roadie1389

roadie1389

Well-Known Member
liferider said:
Rick is correct, I will never understand why Bigdog walked away from Thunderheart. These units are fantastic! On my 03 Chopper I finally had to replace mine 3 yrs ago.
Click to expand...
It is usually political or perceived cost reduction. I have been in Telecom since 97 and seen many outsourcing iterations. All in the name of saving money. It usually does not. A lot of times it comes down to "owning" control. I am sure at one time TH told BDM we will not do that. So they said oh yeah, we will do it ourselves.
 
PacoPetty

PacoPetty

Well-Known Member
KnotSo said:
Bet this person and many more will take notice now.
13 years with my Mastiff and still no real issues and still find myself reading a post and looking at my ride to see if I can catch a potential issue before it becomes a problem. Thanks to all who post and help those of us less mechanically inclined.
Job well done!
Click to expand...
My thoughts exactly!
 
brandon davis

brandon davis

New Member
pauldeepsea said:
Yes, and I have Doug’s rats nest which I decided not to use, if anyone needs it, your welcome to have it


Sent from my iPhone using Tapatalk
Click to expand...
hey whats up? im new on here but been reading the forum all dam day, i have a 2004 ridgeback and it does seem that my ehc is bad, are you saying you have an extra one your willing to get rid of?
 
pauldeepsea

pauldeepsea

Guru
brandon davis said:
hey whats up? im new on here but been reading the forum all dam day, i have a 2004 ridgeback and it does seem that my ehc is bad, are you saying you have an extra one your willing to get rid of?
Click to expand...
Just replied to your pm, it’s not a ehc it’s a pdm.
Also recommend troubleshooting first, and having the ehc tested first before replacing. I would personally not recommend the pdm over the newer units available now.


Sent from my iPhone using Tapatalk
 
bdm7250

bdm7250

Guru
Supporting Member
pauldeepsea said:
Just replied to your pm, it’s not a ehc it’s a pdm.
Also recommend troubleshooting first, and having the ehc tested first before replacing. I would personally not recommend the pdm over the newer units available now.


Sent from my iPhone using Tapatalk
Click to expand...
:agree: 100%, technology is continually advancing and improving. As Alan said when the PDM came out, it and WP were the only options...both of which are a massive ball of wiring and not as reliable as currently offered EHC replacements...
 
You must log in or register to reply here.
Top